shows the needed parameter. Turn
VOLUME knob to choose the needed
value. After choosing, please leave the
unit idle to activate.
TA SEEK/TA ALARM: In TA SEEK mode, the
unit will seek for traffic announcement
program when TA button is pressed; in
TA ALARM the unit does not retune to TA
information.
MASK DPI/MASK ALL: During MASK DPI
mode, the unit will mask only the AF
which has different PI, this is the default
mode; during MASK ALL mode, the unit
will mask the AF which has different
PI and no RDS signal with high field
strength.
RETUNE S/L - SHORT/LONG: “RETUNE”
refers to the time period the unit
allows for radio scan when reception is
interrupted. “S” represents a long time
period, and “L” represents a short time
period.
TA VOL: The default volume level for
TA (Traffic Announcement) mode is 25.
You can set it at any desired level. When
the volume of your current playmode
is below your saved level, the unit will
boost to your saved level once TA signal
is receieved. When the volume of your
current playmode is above your saved
level, the unit will keep the same level
even when TA signal is received.
Radio Operation
To Next Page
Loading...
