1. Auxiliary Input
The Auxiliary Input Jack is on the
front panel. Insert the AUX IN cable's
stereo plug into the AUX IN jack on the
panel of the unit. Route the other end
of the stereo plug to the headphone
jack of any external audio device such
as walkman and discman. Press the
Mode button to choose AUX. Connect
any portable audio device such as a
DVD player or VCD player to the AUX
IN cable. Use the volume control to
adjust volume.
2. RCA Output
The RCA Output Jack is on the back
of the unit. (Refer to Wiring) This
output is for connecting amplifier,
equalizer, or other audio component
that requires a pre-amp out connec-
tion. (Red = Right, White = Left) Follow
the manufacturers instructions for the
audio component that you are
connecting.
RCA, AUX
FAQ
CD’s cannot be loaded
PROBLEM
No Power
Some errors occur in the LCD or no
functions when buttons are pressed.
Unable to receive stations
Poor radio reception
CAUSE/SOLUTION
Check wiring connections.
Check and make sure the fuse is not blown.
Replace with the proper rating/size fuse.
Press the RESET Button (21).
Check and make sure the antenna is connected properly.
Check and make sure the antenna is the correct length. Make
sure the antenna is not broken. If the antenna is broken,
replace it. The antenna is poorly grounded. Check and make
sure the antenna is grounded at mounting location.
A CD is already loaded in the player. Eject CD.
The CD is dirty or damaged.Songs keep skipping
File information shows in LCD but will
not play.
If you have files with Digital Rights Management(DRM). Contact
the vendor for proper use.
MP3/WMA files on the USB/SD flash
memory do not play.
Flash memory is formatted as NTSC. Format the flash memory
as FAT or FAT32. The files have Digital Rights Management
(DRM). If the files you are attempting to play were purchased
online, they may have Digital Rights Management, this unit is
not DRM compatible.
To Next Page
Loading...