EasyManua.ls Logo

Maxx Ice MIM50V - Technical Information; Introduction; Component Locations

Maxx Ice MIM50V
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
TECHNICAL INFORMATION
Model: MIM50 MIM-O MIMV
Descripon 50lb Indoor Ice Maker 50lb Outdoor Ice Maker 50lb Outdoor Ice Maker
Voltage: 120V/60Hz/1Ph, 220V/50Hz/1Ph 120V/60Hz/1Ph, 220V/50Hz/1Ph 120V/60Hz/1Ph, 220V/50Hz/1Ph
Amps: 4.8 4.8 4.8
Ice Type:
Slab Cube Slab Cube Slab Cube
Ice Cube Size:: 3/4" x 3/4" x 1" 3/4" x 3/4" x 1" 3/4" x 3/4" x 1
Power Consumpon: 13.2kWh / 100lbs of ice 13.2kWh / 100lbs of ice 13.2kWh / 100lbs of ice
Unit weight: 83 lbs / 37 kg 83 lbs / 37 kg 84 lbs / 38 kg
Maximum ice storage: 25 lbs 25 lbs 25 lbs
Ice-making capacity: 50 lbs/day* 50 lbs/day* 50 lbs/day*
Unit Dimensions: 14
5
/
8
" x 23
5
/
8
" x 33½" 14
5
/
8
" x 23
5
/
8
" x 33½" 14
5
/
8
" x 23
3
/
8
" x 33
1
/
2
"
Shipping Weight: 93 lbs / 42 kg 93 lbs / 42 kg 93 lbs / 42 kg
Shipping Dimensions: 17" W x 26
3
/
4
" D x 38" H 17" W x 26
3
/
4
" D x 38" H 17" W x 26
3
/
4
" D x 38"
*The actual quanty of ice produced per day can vary with room and water condions.
The technical data and performance index listed above is subject to change and should be used for reference only.
INTRODUCTION
The Maxx Ice MIM50 ice machine series produce hard, gourmet cube ice and oers convenience for homeowners,
restaurants and hotel guests. An insulated ice storage bin is built in.
• A cold water supply is needed.
• A gravity drain is needed.
This users manual is intended as a resource for persons installing, using and servicing the MIM50 series. It contains
valuable informaon on safety and maintenance. Maxx Ice strongly recommends that this manual be kept in a place
where it can be accessed when needed.
The MIM50 series is designed and manufactured according to the highest standards of safety and performance.
It meets or exceeds the safety standard of UL563.
Asbury Foodservice assumes no liability or responsibility of any kind for products manufactured by Maxx Ice that have
been altered in any way, including the use of any parts and/or other components not specically approved by Asbury
Foodservice, The Legacy Companies, or Asbury Service Warranty & Parts. Maxx Ice reserves the right to make design
changes and/or improvements at any me. Specicaons and designs are subject to change without noce.
COMPONENT LOCATIONS
Door
Water
Distribuon
Tube
Evaporator
(ice mold)
Water Trough
Float
Ice Storage Bin
Control Panel
Front Louver
Panel
Caster
MIM50V - MIM50
Front Back
Water
Inlet
Power
Cord
Water
Inlet
Drain
Outlet
Power Cord
Door
Water
Distribuon
Tube
Evaporator
(ice mold)
Water Trough
Float
Ice Storage Bin
On/O/Clean
Buon
Front Louver
Caster
Drain
Outlet
MIM50-O
Front Back
Control Panel

Related product manuals