Oven functions and operation.
The oven can be warmed up using the bottom
and top heaters. Operation of the oven is
controlled by the oven function knob-to set a
required function you should turn the knob to
the selected position.
The oven can be switched off by setting both
of these knobs to the position “●”/”○”.
Oven on and off
12
Turn the control knob clockwise to the manual
operation symbol . So that the cooking time
can be no limited.
To stop the oven by turning the control konb to 0.
0
50
100
150
200
250
Turn the knob to set the required temperature.
When
the
oven
has
achieved
the
programmed
temperature, the red light next to the
temperature selection knob will be off. During
pre-heat, the light will be on.
Cooking functions
Heat the oven conventionally.
Also
known as traditional heat.
Conventional heat with a fan for
improved heat distribution within
the
cooking cavity.
To Next Page
Loading...
