Mayer TM 1010 - Possible Malfunctions and Trouble Shooting

33
2. Possible malfunctions and trouble shooting
a) Mechanical malfunctions
b) Electrical malfunctions
Failure/Malfunction
Cause
Trouble shooting
Motor protection switches off
Fault in electronics
Electronic parts shall be checked
by a skilled electrician
Mechanic overload
Remove the foreign material
causing overload
Frequency converter shows a
malfunction
Overload
Remove the foreign material
Remove compressed soil
Clean shovels
Failure/Malfunction
Cause
Trouble shooting
Noise in the elevator
Jammed stone or wooden piece
Remove cause for malfunction.
Possibly by running elevator
backwards (turn switch left to
position "1" or "2")
Rotating assembly has too much
clearance.
Worn shifting roll or carrier bolt
Replace shifting roll or carrier
bolt.
Chains are too loose
Retighten chains.
Erratic filling of pots
Matter in elevator
Remove source of interference.
Soiled buckets
Clean buckets.
No soil supply
Soil hopper empty
Fill hopper.
Broken return spring at switch
neutral gear
Replace spring.
Free wheel hub is defective
Replace free wheel hub
Pot supply interrupted
Wrong settings
Check settings.