8
5. EU declaration of conformity
According to Appendix IIA of the EU Machinery Directive (2006/42/EC)
Mayer Ipari és Kereskedelmi BT.
Georg Mayer u. 1. 9341 Kisfalud / Magyarország
Mayer GmbH & Co. KG
Maschinenbau u. Verwaltung
Poststrasse 30 89522 Heidenheim | Germany
hereby attests that the machine described in
the following:
Make: Mayer
Model: Potting machine
Series: 2400DR
Year constructed: From 2020
fulfils the safety and health requirements of the
following EU Machinery Directive:
Harmonised standards applied:
Safety of machinery. General principles for design. Risk
assessment and risk reduction (ISO 12100:2010)
Safety of machinery. Electrical equipment of machines. Part 1:
General requirements (IEC 60204-1:2005, modified)
Safety of machinery. Safety-related parts of control systems.
Part 1: General principles for design (ISO 13849-1:2015)
Safety of machinery. Emergency stop. Principles for design
(ISO 13850:2006)
Safety of machinery. Safety distances to prevent hazard zones
being reached by upper and lower limbs (ISO 13857:2008)
Safety of machinery. Interlocking devices associated with
guards. Principles for design and selection (ISO 14119:2013)
Safety of machinery. Minimum gaps to avoid crushing of parts
of human body.
Safety of machinery. Guards. General requirements for the
design and construction of fixed and movable guards. (ISO
14120:2015)
Safety of machinery. Prevention of unexpected start-up
Safety of machinery. Anthropometric requirements for the
design of workstations at machinery.
(ISO 14738:2002, + Cor 1:2003 + Cor 2:2005)
Safety of machinery. Human physical performance. Part 2:
Manual handling of machinery and component parts of
machinery
Safety of machinery. Human physical performance. Part 5: Risk
assessment for repetitive handling at high frequency.
To Next Page
Loading...