EasyManuals Logo

Maytag MDB4949SDM Installation Instructions

Maytag MDB4949SDM
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Turn both leveler legs to the same height. Put wheels in the
required position determined from “Dishwasher Height
Adjustment Chart.
Built-up floors: If the kitchen floor is higher than the cabinet
opening's floor - for example, the kitchen floor tile does not
extend into the cabinet opening - add shims as needed in the area
shown to bring the dishwasher up to 34" (86.4 cm) below the
countertop.
NOTE: Shims must be securely attached to floor to avoid
movement when the dishwasher is in use.
Choose Attachment Option
Using 2 or more people, stand the dishwasher up.
IMPORTANT: The dishwasher must be secured to the cabinet.
There are two brackets found in the parts bag. Attach the
brackets using Option A if the countertop is wood, laminate or
another similar surface. If your countertop is marble, granite or
another hard surface, install using Option B.
Option A, Countertop Attachment
Remove the brackets from the package and insert into the open
slots on the left and right-hand top of the dishwasher collar as
shown.
Using a pair of pliers, bend the tab down to secure the bracket in
place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.

Other manuals for Maytag MDB4949SDM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Maytag MDB4949SDM and is the answer not in the manual?

Maytag MDB4949SDM Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colormonochromatic stainless steel, stainless steel
Cycle Selectionspowerblast, auto, normal, quick, rinse
Options/Settingsheated dry, hi temp wash, sani rinse®, control lock, 1-24 hour delay
Delay Startyes
Number of Racks2
Cycle Signalyes
Water Filteryes
Food Disposeryes
Sanitize Settingsno
Annual Energy Consumption270 kilowatt hours
Voltage120 volts
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth25.2 inches

Related product manuals