9
To remove the
kinks, stretch
the cable out
completely and let
it sit for at least a
day in the sun.
If the pool cleaner will not be in use for an extended
period, perform the following storage steps:
• Make sure that no water is left in the pool cleaner.
• Thoroughly clean the filter bag or cartridge and insert in
place.
• Roll up the cable so that it has no kinks.
• Store the Pool Cleaner in a protected area upsidedown
(not on its brushes).
5.5. Off-season storage
Cable
Robotic Pool Cleaner POOL UP
| Operating Instructions
To Previous Page
Loading...
Need help?
General
