2
Motor protection: IP 68
Minimum depth: 0.80m / 2.6ft
Maximum depth: 5m / 16.4ft
3. WARNINGS AND CAUTIONS
3.1. Warnings
•
Use the originally supplied power supply only
•
Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
•
Keep the power supply out of standing water
•
Position the power supply at least 3m / 10ft away from the edge of the pool
•
Do not enter the pool while the pool cleaner is working
•
Unplug the power supply before servicing
3.2. Cautions
Use the Pool Cleaner in the following water conditions only:
Chlorine Max 4 ppm
pH 7.0 - 7.8
Temperature 6 – 34°C / 43-93°F
NaCl Maximum = 5000 ppm
•Input-100-250ACVolts
•50-60Hertz
•180Watt
•Output-<30VDC
•IP54
Digital “Switch-Mode” Power Supply
Power Supply
Robotic Pool Cleaner POOL UP
| Operating Instructions
2.
SPECIFICATIONS
performance and easy maintenance.
The Robotic Pool Cleaner by Maytronics deliver advanced cleaning technologys, long lasting
enhance maximum pool hygiene.
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
Thank you for purchasing a Maytronics Pool Cleaner.
1.
INTRODUCTION
Operating Instructions
Robotic Pool Cleaner POOL UP