Installation instructions Positioning the solar collector
HeatMiser II Installation guide. © 2014, all rights reserved P a g e | 8
INSTA LLATION INS TRUC TIO NS
Please follow the instructions to ensure a safe and quick installation of the HeatMiser II panel
to the existing pool/equipment. These instructions assume that the pool and filter system are
already assembled and there is a hose attached to the pool return (pool water inlet).
POSI T IONING T HE S OLA R C O LLE CTOR
Carefully open the solar collector box and gently pull out the panels and all accessories. Make
sure that all parts listed on page 7 are accounted for.
Locate a hard leveled surface that is exposed to the sun at least 6 hours per day. Avoid areas
that might be shaded at different intervals of the day.
Lay the solar collector horizontally on the surface.
OPEN S TAND
1. Open the small plastic bag containing two (2)
pieces of string and 6 clasps.
2. Erect the first panel and open the transparent stand.
To Next Page
Loading...