5-34
Driving Your Mazda
Form No. 8S06-EA-03H
Switches and Controls
▼
Headlights
To turn on the lights, turn the headlight
switch on the end of the control lever.
▼
Lights-On Reminder
If lights are on and the key is removed
from the ignition switch, a beep sound
will be heard when the driver’s door is
opened.
▼
Headlight High-Low Beam
Push the lever forward for high beam.
Pull it back for low.
▼
Flashing the Headlights
To flash the headlights, pull the lever fully
toward you. The headlight switch need
not be on, and the lever will return to the
normal position when released.
Lighting Control
Switch Position OFF
Headlights Off Off On
Taillights
Parking lights
License lights
Side-marker lights
Off On On
NOTE
To prevent discharging the battery,
don’t leave the lights on while the
engine is off.
Low beam
High beam
J16R_8S06-EA-03H_Edition1.book Page 34 Wednesday, July 9, 2003 4:19 PM
To Next Page
Loading...
