8-37
Maintenance and Care
Owner Maintenance
Form No. 8S06-EA-03H
3. Install the new bulb in the reverse order
of removal.
Overhead light, Courtesy lights, Vanity
mirror lights*
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens with the
screwdriver.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
Edge
With sunroof
Edge
Overhead light
Courtesy lights
Edge
Vanity mirror lights
Edge
*Some models.
J16R_8S06-EA-03H_Edition1.book Page 37 Wednesday, July 9, 2003 4:19 PM
To Next Page
Loading...
