3-15
Knowing Your Mazda
Doors and Locks
Form No. 8S06-EA-03H
Opening/Closing with Switches
1. Bring the vehicle to a complete stop.
2. Put the shift lever in park (P).
3. Set the parking brake.
4. Unlock the sliding doors.
5. Look to be sure that the area around the
door is clear of people.
6. Press the power sliding doors main
switch to the ON position.
If you attempt to operate the vehicle in
any way other than the above conditions
(except step 4) while the power sliding
doors are opening/closing electrically, the
beep sound will be heard. Moreover, a
door that is sliding open will stop.
When the above conditions are satisfied,
you can resume power sliding door open/
close operation with the switches.
Operation from the driver’s seat
Operate the left/right power sliding door
switch to open/close the left/right door.
When either power sliding door switch is
pressed for 1 second or more, the door
controlled by that switch will open/close
automatically after the beep sound is
heard.
NOTE
•
The left power sliding door cannot
fully open when the fuel-filler lid is
open. To fully open the left power
sliding door in this situation, carry
out the following procedure:
1. Close the left power sliding door.
2. Close the fuel-filler lid.
3. Open the left power sliding door.
•
When the ABS warning light
remains illuminated, the power
sliding doors cannot be opened
electrically (page 5-29).
NOTE
•
If a power sliding door switch is
pressed again while the beep sound
is being heard, the operation can be
canceled.
•
Press a power sliding door switch to
stop the power sliding doors while
they are opening/closing.
Left and right power
sliding door switches
J16R_8S06-EA-03H_Edition1.book Page 15 Wednesday, July 9, 2003 4:19 PM
To Next Page
Loading...
Need help?
General
