Black plate (389,1)
Rear
CAUTION
The cap cannot be completely
removed. Do not use excessive force
as it may damage the cap or scratch
the painted bumper surface.
NOTE
If it is difficult to remove the tiedown eyelet,
wrap the jack lever with a cloth as shown in
the figure and press the marking on the cover
to remove it.
Front
Rear
3. Securely install the tiedown eyelet
using the lug wrench.
In Case of an Emergency
Emergency Towing
7-21
CX-7_8CG3-EA-11J_Edition1 Page389
Saturday, September 24 2011 10:33 AM
Form No.8CG3-EA-11J
To Next Page
Loading...
