J94S.book Page 20 Saturday, June 23, 2001 1:04 PM
Driving Your Mazda
Instrument Cluster and Indicators
▼ Speedometer
The speedometer indicates the speed of
the vehicle.
▼ Odometer and Trip Meter
The ignition switch must be in the ON
position.
The display mode can be changed from
odometer to trip meter A to trip meter B
and then back to odometer by pressing the
selector. The selected mode will be
displayed.
Selector
O dom eter
When this mode is selected, ODO will be
displayed.
The odom eter records the total distance
the vehicle has been driven.
Trip m eter
The trip m eter can record the total
distance of two trips. One is recorded in
trip m eter A, and the other is recorded in
trip m eter B.
For instance, trip m eter A can record the
distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
When trip meter A is selected, pressing
the selector again within one second will
change to trip m eter B mode.
When trip meter A is selected, TRIP A
will be displayed. When meter B is
selected, TRIP B will be displayed.
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to "0.0" by holding
the selector depressed for m ore than 1
second. Use this meter to measure trip
distances and in to compute fuel
consumption.
5-20
&
Form No. 8Q50-EA-01G
To Next Page
Loading...
