J94S.book Page 6 Saturday, June 23, 2001 1:04 PM
Before Driving Your Mazda
Before Starting the Engine
Before Getting In
Be sure the windows, outside
mirror (s), and outside lights are clean.
Inspect inflation pressures and
condition of tires.
Look under the vehicle for any sign of
a leak.
If you plan to back up, make sure
nothing will be in your way.
NOTE
Engine oil, engine coolant, brake/
clutch fluid, washer fluid, and other
fluid levels should be inspected daily,
weekly, or at refueling, depending on
the fluid. See Maintenance, Section 8.
4-6
After Getting In
• Are all doors closed and locked?
• Are the inside and outside mirrors
adjusted?
• Is everyone’s seat belt fastened?
• Do all the lights work?
• Check all gauges.
• Check all warning lights when the
ignition switch is turned to the ON
position.
• Release the parking brake and make
sure the parking brake warning light
goes off.
Always be thoroughly familiar with your
Mazda.
Form No. 8Q50-EA-01G
To Next Page
Loading...
