J94S.book Page 33 Saturday, June 23, 2001 1:04 PM
Driving Your Mazda
Switches and Controls
Turn and Lane-Change
Signals
▼ Turn Signal
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Right turn
Right lane change
OFF
Left lane
change
Left turn
Daytime Running Lights
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition
switch is turned to the ON position.
NOTE
The running lights go off when the
parking brake is applied.
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change — until the
indicator flashes— and hold it there. It
will return to the off position when
released.
NOTE
If an indicator light stays on without
flashing or if it flashes abnormally, the
turn signal bulb may be burned out.
5-33
Form No. 8Q50-EA-01G
To Next Page
Loading...
