J94S.book Page 2 Saturday, June 23, 2001 1:04 PM
Driving Your Mazda
Starting and Driving
Ignition Switch
▼ Ignition Switch Positions
The steering wheel locks to protect
against theft. Only in this position can the
key be removed.
M anual transaxle
When turning the ignition switch to the
LOCK position, push the key in at the
ACC position.
5-2
Autom atic transaxle
When turning the ignition switch to the
LOCK position, keep the shift lever in P.
ON(II)
ACC(I)
Shift lever
LOCK(0) engaged in P
(park)
& WARNING
Removing the Key:
It’s dangerous to remove the key from
the ignition switch while the vehicle is
moving. Removing the key allows the
steering wheel to lock. You will lose
steering control and a serious
accident could occur.
Remove the key only when the vehicle
is parked.
Not Setting the Parking Brake:
Leaving the driver’s seat without
setting the parking brake is
dangerous. Unexpected vehicle
movem ent could occur if the parking
brake is not set. This could cause an
accident. Before leaving the driver’s
seat, always set the parking brake and
make sure the shift lever is in P with
an automatic transaxle or in 1 or R
with a m anual transaxle.
Form No. 8Q50-EA-01G
To Next Page
Loading...
