J94S.book Page 8 Saturday, June 23, 2001 1:04 PM
Interior Comfort
Climate Control System
/h WARNING
The Recirculated A ir Position:
Using the recirculated air position in
cold weather will cause the glass to
fog up. Your vision w ill be hampered,
which could lead to a serious
accident. Do not use the recirculated
air position in cold weather.
▼ Heating
1. Set the mode selector switch to the
position.
2. Set the temperature control dial to the
hot position.
3. Set the fan control dial to the desired
speed.
NOTE
If the windshield fogs up easily, set
the mode selector switch to the
position.
If cooler air is desired at face level,
set the mode selector switch at the
-Si position and adjust the
temperature control dial to maintain
maximum comfort.
The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
In the position, the outside air
is automatically selected.
▼ Cooling (With Air Conditioner)
1. Set the mode selector switch to the 1 *
position.
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner.
6-8
Form No. 8Q50-EA-01G
To Next Page
Loading...
