J94S.book Page 5 Saturday, June 23, 2001 1:04 PM
Essential Safety Equipment
Seats
R ear height ad justm ent
Raise or lower the back of the switch to
adjust the rear height of the seat-bottom.
Height adju stm ent
Raise the seat-bottom by pulling up on the
center of the switch. Release the switch
when the seat is where you want it.
Lower the seat-bottom by pressing down
on the center and releasing it when the
seat is where you want it.
▼ Head Restraint
A WARNING
Head Restraints Adjustment:
Driving with the head restraints
adjusted too low or rem oved is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Always drive with the head restraints
inserted when seats are being used
and make sure they are properly
adjusted.
Height adjustm ent
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top
parallels the top of the passenger’s ears,
never the passenger’s neck.
2-5
Form No. 8Q50-EA-01G
To Next Page
Loading...
