J94S.book Page 26 Saturday, June 23, 2001 1:04 PM
Interior Comfort
Audio System
▼ Operating the Cassette Tape Player
Cassette tape play button
Rewind
button
Cassette tape insert
Insert the cassette tape into the slot, open
edge to the right and cassette tape will
begin play and "TAPE" will be displayed.
At the end of the cassette tape, the unit
automatically reverses cassette tape play.
When A is lit, the cassette tape’s top side
is playing. When Y is lit, the bottom
side is on.
NOTE
When a metal tape is inserted, the
player will automatically compensate
for it and "MTL" will be displayed.
Playing
Press the cassette tape play button
(MDH-APE) to start playing when a
cassette tape is in the unit. If there isn’t a
cassette tape in the unit when the cassette
tape play button (MDnAPE) is pressed,
"No TAPE" will flash on and off in
sequence.
Dolby noise reduction
When using a tape with Dolby NR*, push
the Dolby NR button ( H ). The m
symbol will be displayed. To play a tape
without Dolby NR, push the button once
again.
6-26
Form No. 8Q50-EA-01G
To Next Page
Loading...
