J94S.book Page 40 Saturday, June 23, 2001 1:04 PM
Interior Comfort
Interior Equipment
1. Using a coin, turn the cap
counterclockwise (about 45° from the
closed position) and remove it.
2. Open the tray by pulling the release
catch.
3. Pass the plug cord through the hole of
the tray and insert the plug in the
socket.
4. Make sure the plug cord is running
through the cap slot, reinstall the cap
and turn it clockwise (about 45° to the
opened position).
& WARNING
Using the Cup Holder:
Using the cup holder to hold hot
liquids while the vehicle is m oving is
dangerous. If the contents spill, you
could be scalded. Never use the cup
holder to hold hot liquids while the
vehicle is moving.
6-40
Form No. 8Q50-EA-01G
To Next Page
Loading...
