21
Loading the factory settings
Before you reset the device to its factory settings, note the following:
● The device must be operational (LED Pwr + Rdy light up).
● The IP address of the router is reset to 192.168.0.100.
You may have to adjust the network settings of the conguration computer accordingly.
To reset the mbNET.mini to factory settings, proceed as follows:
Click the button Reset once .
Then press Function straight
afterwards and keep it pressed
down .
After about 60-90 seconds, the
Rdy LED starts ashing .
As soon as the Usr LED starts
to ash, release the button
Function .
When the LED Pwr and Rdy
light up, the factory settings have
been loaded .
The mbNET.mini is now ready
for operation and be congured again.
Pwr
Pwr
Pwr
Pwr
Pwr
Rdy
Rdy
Rdy
Rdy
Rdy
Con
Con
Con
Con
Con
Us
Us
Us
Us
Us
r
r
r
r
r
To Next Page
Loading...
Need help?
General
