3
This Quick Start Guide provides a quick Overview of selected operating procedures and
functions of the mbNET.mini industrial router. However, the detailed manual with the important
Notes and safety instructions can NOT be replaced by this document.
Read the following instructions carefully and keep this document in a safe. Latest information,
updates and the complete Manual, visit our website at www.mbconnectline.com.
NOTE: electrostatic discharge!
Observe the necessary safety
precautions when handling com-
ponents that are vulnerable
to electrostatic discharge (EN 61340-5-1 and
IEC 61340-5-1)!
The mbNET routers are maintenance-free
units.
If a mbNET router have damage or malfuncti-
on, the device must be immediately taken
out of service and secured against inadver-
tent operation.
The complete manual of the router as well
as the conformity declaration can be found
in the download area on our website
www.mbconnectline.com
• Only qualied specialist personnel may install,
start up, and operate the router. The national
safety and accident prevention regulations
must be observed.
• The router is built to the latest technological
standards and recognized safety standards
(see Declaration of Conformity).
• The router is only intended for operation in the
control cabinet and with SELV according to
IEC 60950/EN 60950/VDE 0805.
• The router may only be connected to devices,
which meet the requirements of EN 60950.
• The router is for indoor use only.
• Never open the router chassis. Unauthorized
opening and improper repair can pose a dan-
ger to the user. Unauthorized modications
are not covered by the manufacturer’s war-
ranty.
Opening up the device voids the warranty!
Safety instructions
To Next Page
Loading...
Need help?
General
