22
Technical Data
MB connect line GmbH
Fernwartungssysteme
Winnettener Str. 6
91550 Dinkelsbühl
Germany
+ 49 (0) 700 / MBCONNECT
+ 49 (0) 700 / 62 26 66 32
www.mbconnectline.com
Factory settings on delivery
The mbNET.mini is delivered with the following factory settings:
IP Address 192.168.0.100
Subnet Mask 255.255.255.0
Username admin
Password (no password needed)
ADVICE! Change unconditionally and without delay the default login information!
Hereby, MB connect line GmbH declares that the radio equipment
type MDH 861; -862 EU; -863; -865; -866; -867 is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.mbconnectline.com
SIMPLIFIED EU DECLARATION OF CONFORMITY
NOTICE
The device types MDH 862 AT&T and MDH 866 AT&T are not
CE marked and must not be operated or commissioned in the
European Economic Area (EEA)!
PROG. CNTLR.
E482663
© MB CONNECT LINE 2007 - 2019
Voltage 10 – 30 V DC
Power (@ 24 V) 250 mA (max. 1,8 A*)
Protection class IP 30**
Area of application Dry environment
* 250 mA = operating current, max. 1.8 A under full load (USB interface + switched outputs I/O 1 and I/O 2).
** at full occupancy of all connections and interfaces. Alternatively, unused interfaces can be covered
with dust protection plugs.
To Previous Page
Loading...
Need help?
General
