CARER: How to setup the Non-Movement feature
mcarewatch.com.au
18
1. Log into the web
dashboard and click on
‘Device’ and ‘Features’,
then scroll down the
page to ‘Non-movement
Detection’
2. Change the ‘Detect non-movement’ to ON
3. Click on the days to highlight the days you would like this
feature to be switched active
4. Select the time to Start and End the monitoring of this
feature. All times are based on 24 hour time, i.e. 22:00
represents 10:00PM
5. Select how often you would like to detect the no-
movement and then click on the SAVE button at the top of
the Features PAGE
To Next Page
