McCrometer ProComm - Tables; Write Protect; Totalizers

30125-48 Rev. 1.0 | 05AUG2021
Page 9
Tables
Command #134: Read Density
This command returns the uid density setting in xed unit (Kg/l).
Byte Format Description
Request Data Bytes 0
Response Data Bytes
0 Enum Unit code (xed)
1 - 4 Float Density
Command-Specic
Response Codes
0 Success No command-specic errors
Command #135: Read Flow Direction
This command returns the ow direction.
Byte Format Description
Request Data Bytes 0
Response Data Bytes 0 Enum Flow direction
Command-Specic
Response Codes
0 Success No command-specic errors
Command #136: Read Mass Unit Enable
This command returns the mass unit enable setting.
Byte Format Description
Request Data Bytes 0
Response Data Bytes 0 Enum Mass unit enable
Command-Specic
Response Codes
0 Success No command-specic errors
10.0 Tables
10.1 Write Protect
Value Description
0 Not Write Protected
1 Write Protected
10.2 Totalizers
Value Description
0 Totalizer Positive (Flow Rate Positive)
1 Totalizer Negative (Flow Rate Negative)
2 Partial Totalizer Positive (Flow Rate Positive)
3 Partial Totalizer Negative (Flow Rate Negative)