2
TABLE OF CONTENTS
Introduction 2
Identification of Symbols 2
Identification (What is What?) 3
General Safety Precautions 4
Assembly 7
Fuel Handling 10
Starting and Stopping 11
W orking Techniques 12
Service and Adjustments 15
Storage 17
Troubleshooting Table 18
Technical Data 19
Declaration of Conformity 21
INTRODUCTION
Dear Customer,
Thank you for choosing a McCulloch product. You are thereby part of a story that started long
ago, when the McCulloch Corporation started its manufacturing of engines during WorldWar II. In
1949, when McCulloch introduced its first light one-man chain saw, woodworking would never be
the same again.
The line of innovative chain saws would continueover the decades, and business was expanded,
first by airplane and kart engines in the 1950s, then by mini chainsaws in the 1960s. Later, in the
1970s and 80s, trimmers and blower/vacs were added to the range.
Today, as a part of the Husqvarna group, McCulloch continues the tradition of powerful engines,
technical innovations, and strong designs that have been our hallmarks for more than half a century .
Lowering fuel consumption, emissions and noise levels are of top priority to us, as is improving safety
and user-friendliness.
We certainly hope that you will be satisfied with your McCulloch product, as it is designed to be
your companion for a long time. By following this operators manual’s advice on usage, service,
and maintenance, its lifespancan be extended. If you should need professional help with repair or
service, please use the Service Locator at www.mcculloch.com.
McCulloch has a policy of continuous product development and therefore reserves the right to
modify the design and appearance of products without prior notice.
This manual can also be downloaded at www.mcculloch.com.
IDENTIFICATION OF SYMBOLS
Chain brake,
activated (right)
Chain brake,
not activated (left)
WARNING! This chain
saw can be dangerous! Care-
less or improper use can cause
serious or even fatal injury.
Read and understand the
instruction manual before
using the chain saw.
Always use two
hands when
operating the
chain saw.
WARNING! Contacting the guide bar tip with any object
should be avoided; tip contact may cause the guide bar to
move suddenly upward and backward, which may cause se-
rious injury .
Always wear appropriate ear
protection, eye protection
and head protection.
Sound power level
Sound pressure level
at 7,5 meters
This product is in accord-
ance with applicable
EC directives.
To Next Page
Loading...
Need help?
General
