21
DECLARATION OF CONFORM ITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46--36--146500, as authorised
representative in the Community , declare that the chain saw for forest service models
McCulloch CS 360T, CS 400T, and CS 420T SAS-AV with serial numbers dating from 2012
and onwards (the year is clearly stated on the rating plate, followed by the serial number),
comply with the requirements of the COUNCIL’S DIRECTIVES:
of 17 May 2006 “relating to machinery” 2006/42/EC;
of 15 December 2004 “relating to electromagnetic compatibility” 2004/108/EC, and applicable
supplements; and
of 8 May 2000 “relating to the noise emissions in the environment” in accordance with Annex
Vof2000/14/EC. For information relating to noise emissions, see Technical data section.
The following standards have been applied: ISO 12100:2010, CISPR 12:2007, ISO
11681-1:2011.
Notified body , 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3 S--754 50
Uppsala, Sweden, has carried out EC type examination in accordance with the machinery
directive’s (2006/42/EC) article 12, point 3b. The certificates for EC type examination in
accordance with annex IX, have the numbers: 0404/12/2359.
The supplied chain saw conforms to the example that underwent EC type examination.
12--10--15
Ronnie E. Goldman, Director of Engineering
Authorized representative for Husqvarna AB and
responsible for technical documentation
To Next Page
Loading...
Need help?
General
