McCulloch CS 420T User Manual

3
IDENTIFICATION OF SYMBOLS
Move ON/STOP switch to
the ON position.
Slowly press primer bulb
6 times.
Pull the starter rope
sharply with your right
hand until the engine fires.
Pull the starter rope sharply
with your right hand until
the engine starts.
Pull choke/fast idle lever
out to the full extent (to
the FULL CHOKE posi-
tion).
Push the choke/fast idle
lever in to the HALF
CHOKE position.
Starting Reminder
Starting a warm engine
IDENTIFICATION (WHAT IS WHAT?)
Chain
Adjustment Tool
(Bar Tool)
Bar Oil Fill Cap
Chain
Front Hand Guard
Starter Rope
ON/STOP
Switch
Muffler
Choke/Fast
Idle Lever
Starter Housing
Idle Speed Screw
Bumper
spike
Primer Bulb
Front Handle
Fuel Mix Fill Cap
Guide Bar
Outer
Tensioning
Ring
Cylinder Cover
Rear
Handle
Chain
Direction
of T ravel
Chain
Catcher
Clutch
Cover
Bar
Knob
Chain
Brake
Throttle
Lock-out
Throttle Trigger

McCulloch CS 420T Specifications

General

Brand	McCulloch
Model	CS 420T
Category	Chainsaw
Language	English