20 – English
Driving
• In order to obtain an even cutting height, it is important
that the air pressure is the same in both front wheels. See
the “Technical data” section.
• Avoid mowing a wet lawn. The mowing results are inferior
since the wheels sink down into the soft lawn.
• Hose down the cutting unit with water underneath each
time it is used.
Starting on a slope, manual gearbox
M105-85F
1 Press down the parking brake pedal.
2 Push the throttle control to full throttle position.
3 Disengage the engine and select 1st gear.
4 Gradually release the clutch pedal.
Stop the engine
Preferably allow the engine to idle for a minute to obtain
normal working temperature before stopping it if it has been
working hard. Avoid idling the engine for long periods, as
there is a risk of carbon build-up on the spark plugs.
1 Disengaging the blades.
2 Lift up the cutting deck by stepping on the lifting pedal and
pressing in the lock button.
3 M105-85F Pull back the throttle and move the gear shift
lever to ”N" – neutral position. Turn the ignition key to the
”STOP”.
M125-85FH Pull back the throttle and turn the ignition key
to the ”STOP” position.
4 When the ride-on mower is at a standstill, engage the
parking brake.
WARNING! Do not use the machine on
ground that slopes more than 10°°
°°
..
..
Mow
slopes upwards and downwards, never
across. Avoid sudden changes in direction.
MAX 10º
N
To Next Page