English – 5
KEY TO SYMBOLS
Symbols
These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Reverse
Neutral
Fast
Slow
Stop the engine.
Battery
Choke.
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Warning: rotating parts. Keep hands and feet
clear.
Clutch in
Clutch out
Parking brake
Brake
Clutch
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in the Technical data chapter and
on the label.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Do not use the Rider on ground that slopes
more than 10°.
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine or
equipment
Drive very slowly if no cutting unit is fitted
>10
To Next Page
Loading...
