MCD Racing RR5 Competition - Body Cut-Out; Cut-Out T Ps

11
1. Drll holes on the corners and center before cuttng out.
2. Cut the specfed lnes wth PC scssors.
3. Scratch the edges wth the cutter tool shown n Figure P.
4. Bend and brake the peces towards nsde of the body.
(We recommend to use mechanc gloves durng these steps)
Fuel tank access
Ar ntake
Exhaust
Pull start access
Power swtch access
Engne-o access
Body cut-out
Cut-out tips
Important!
Figure P
We recommend to ream out more
holes for coolng f the weather
temprature gets too hgh.