24
121102
8. Wipe the exposed surface of the upper
and lower release sheets with a clean,
sanitizer-soaked grill cloth.
(See Figure 34.)
Figure 34
9. Open one packet of McD Hi-Temp Grill
Cleaner (HTGC). Empty the contents into
a clean entrée base or stainless steel
pan. (See Figure 35.)
Figure 35
10. Dip a clean, sanitizer-soaked grill cloth
into the grill cleaner. Do not saturate the
cloth. (See Figure 36.)
Figure 36
11. Use the grill cloth dampened with grill
cleaner to clean the exposed surfaces of
the upper and lower release sheets.
(See Figure 37.)
Figure 37
12. Remove the release sheet locking clips,
the bars, and the upper and lower release
sheets. Wash and rinse the clips and bars
in the 3-compartment sink. If necessary,
soak them in a hot solution of SolidSense
APSC to remove carbon accumulatio n.
(See Figure 38.)
Figure 38
13. Place all release sheets flat on the
release sheet storage tray. DO NOT fold,
crease, or place them on sharp objects.
DO NOT clean them in the 3-compartment
sink.
To Next Page
