Page UMC24
PDQ
The PDQ module is a specialized EQ circuit that offers a boost
(Peak) and cut (Dip) at a selected frequency. This Pultec-like
operation has a sound all its own, and can take the user in
another tone direction that a standard EQ would not. The
‘WIDE’ mode for each band will displace the boost (Peak)
and cut (Dip) gains further from each other. Also note the
default values for the PDQ gains is +/- 6 dB, implying they
were intended to be working simultaneously. But by rotating
the Peak or Dip knob fully to the left, their effect on the gain
response of the EQ is minimized.
*All Trademarks are property of their respective owners. UREI TM and TeletronixTM are trademarks of the Teletronix/Universal Audio/UREI
companies; dbxTM is a trademark of the Harmon Corporation; NeveTM is a trademark of AMS Neve; These companies are not affiliated in any
way with McDSP, nor do they endorse the 6060 Ultimate Module Collection plug-in. The trademarks of these companies are used solely for the
purpose of describing the sounds produced by the 6060 Ultimate Module Collection plug-in.
To Next Page
Loading...