MCE Touch AEP Series - Users Programming Machines Parameters

Hour/Date*
Working days**
Reg. softener
Cup heater*
Single count
Credit*
Doser alarms
Language
Unlock
• The areas designated with (*) are accessible only when the machine is prefigured with the appropriate
functions.
• The areas designated with (**) can be modified only if the appropriate function has been enabled
by authorized personnel.
i
USER’S PROGRAMMING MENU
The following submenus can be visualized and/or modified by means of the display:
In order to enter the programming menu, simultaneously press the keys “ ” and “ ” until on display will appear
the message “Password”. Press the key “M” to enter into the user’s programming menu.
Use the increase “ ” and decrease “ ” keys in order to scroll the various programming submenus.
Use the ENTER “ ” key to enter in the desired submenu or to pass from one parameter to another in the same
submenu.
Use the increase “ ” and decrease “ ” keys to modify the parameter’s value.
In order to save the values of the modified parameters and return to the main menu use the key “ ”.
User’s programming machine’s parameters
10.
^
M
^
^
^
^
The machine automatically exits programming if no selections are made for at least 60 seconds.
i
The selected submenu is highlighted by changing the writing’s colour into white.
i
SAE Display
20
english