McHale 991B Round Bale Wrapper
35
8
Electronic Control System
8.1 Bale Wrap Computer (991 BC & 991 BJS)
.
There are three buttons at the centre of the front panel:
CAL or Program
Select Channel
Set or Reset
These are used individually or in combination to program, set/reset or select a function.
The Bale Wrap Computer is used to monitor and control a number of different McHale
bale wrapping machines both manual and semi-automatic. It is very important that the
correct program be selected to control the wrapping machine.
Model Type of control Program
991 B Manual Program 1
991 BC Cable control Program 2
991 BJS Semi-automatic Program 2
Current number
of wraps
Channel
Indicator
CAL/ Program
Not used
Not used
Set Target Wraps
Set Alarm Threshold
Reset Totals
Target number of
wraps
Select Channel
To Next Page
Loading...