McHale 991B Round Bale Wrapper
45
8.3 Electronic Control Box Functions
No. Function
1 Display Up
2 ESC, i.e. return to the working screen
3 Enter
4 Display Down
5 Stop
6 Display Screen
7 Table tip (In Automatic Mode, it starts the tipping part of the cycle)
8 Table lower
9 Cut & hold close
10 Cut & hold open
11 Table reverse (slow)
12
Table forward (slow/fast)
Press the button for slow speed, release & quickly press it again for fast
Resume: Restarts the wrapping or any other interruption
13 Automatic/Manual mode
14 Automatic cycle start
15 Bale lift arm down
16 Bale lift arm up
17 Not used on this machine
18 Not used on this machine
To Next Page
Loading...
