EasyManua.ls Logo

McHale 995 LSR - User Manual

McHale 995 LSR
81 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
McHale
Ballinrobe
Co. Mayo, Ireland
Tel: +353 94 9520300
Fax: +353 94 9520356
Email: sales@mchale.net
Website: www.mchale.net
CLT00006_7
995 L+T
995 L+T Series Square Bale
Wrapper
Operator Instructor Manual
Issue 8

Table of Contents

Questions and Answers

  • L
    Laura JenningsAug 10, 2025
    Why is my McHale 995 LSR table stopping in the wrong position?
    • A
      Adriana MooreAug 10, 2025
      The table might stop in the wrong position due to several reasons. Here's what you can check: * Incorrect magnet settings: Reset the magnets. * Starting position: Ensure you start with the cut & hold at the rear of the machine. * Slow down setting: Adjust the slow down setting in the control box. * Slow speed valve: Check the electrical connections of the slow speed valve. * Slow speed cartridge: Clean any dirt from the slow speed cartridge. * Table rotation speed: Set the table rotation to 10 RPM if the slow speed is set too fast.
  • S
    scastanedaAug 18, 2025
    What to do if the McHale Stretch Wrapping Systems table rotates but bale not indexing?
    • C
      Cassandra JacksonAug 18, 2025
      If the table rotates, but the bale isn't indexing, the issue could be: * A broken table drive roller shearbolt: Replace the shearbolt. * Broken gearbox cross shaft roll pins: Replace the roll pins.
  • J
    Jeffrey MooreAug 25, 2025
    Why is my McHale Stretch Wrapping Systems table slow to tip down?
    • L
      Lisa TerryAug 25, 2025
      If the table is slow to tip down, consider the following: * High back pressure: Ensure a free flow return is fitted. * Faulty quick release couplings: Replace the couplings.
  • W
    Wayne ClementsSep 1, 2025
    How to fix a McHale 995 LSR table that is moving in tip position?
    • C
      Christian MorrisSep 2, 2025
      If the table is moving in the tip position, it may be due to a loose drive chain. Tighten the chain to resolve this.

Summary

Warranty and Guarantee

Product Information

L Series Dimensions and Specifications

Details physical dimensions, transport, and tractor attachment requirements.

T Series Dimensions and Specifications

Details physical dimensions, transport, and tractor attachment requirements.

General Safety

Understanding Safety Information

Explains safety symbols (Warning, Caution, Information, Environmental) and their meanings.

Following Safety Instructions

Emphasizes reading instructions and maintaining safety decals for safe operation.

Emergency Preparedness and Fire Safety

Covers emergency equipment, safe practices, and procedures in case of fire.

General Safety Warnings and Precautions

Covers safety devices, danger zone, and pre-operation checks for safe operation.

Performing Maintenance

Specific Safety Warnings

Electronic and Hydraulic Safety Warnings

Warnings related to electronic components and the machine's hydraulic system.

Noise Level and Fire Precautions

Safety guidelines regarding noise exposure and preventing fires.

Safety Decal Locations

Explaining Safety Warnings and Decals

Detailed explanation of various safety decals and their meanings.

Machine Lifting Guidelines

Instructions and warnings for safely lifting and moving the machine.

Tractor Requirements & Preparation

Tractor Power and Connection Requirements

Hydraulic Spool Valve Setup

Attaching the Wrapper (L and T Series)

Manual Controls (995 L & LS)

Electronic Control System

Bale Wrap Computer Overview (995 L & 995 LS)

Selecting Program and Understanding Channels

Channel 1: Current;Target Wraps Display

Channel 2: Store Totals (A-H)

Channel 4: Grand Total & Channel 5: Wrapping Rate

Channel 6: Bale Wrapping Speed & Overspeed Alarm

Total Reset Procedure

Electronic Control Box (995 LSR, TS & TSR)

Introduces the electronic control box used on specific machine models.

Control Box Functions and Buttons

Lists and describes the functions of each button on the control box.

Available Wrapping Programs

Electronic Control Box Setup Navigation

Provides a flowchart for navigating and configuring the control box settings.

Control Box Features: Working Display and Counters

Explains display screens and details different bale counters.

Voltage Monitor and Bale Counter Operations

Explains voltage monitoring and how to manage bale counters.

Setting Wraps and Operator Setup Menu

Instructions for setting wraps and navigating operator setup options.

Film Sensor Operation

Display Contrast and Remote Type Selection

Radio Remote Setup and Operation

Details on setting up and using the radio remote control.

Continuous Cycle and Auto Load Setup

Wrapper Operation

Preparing the Machine for Wrapping

Loading Plastic Film and Static Remote Wrapping

Road Traffic Safety & Operation

Pre-Road Travel Checks and Safety

Field Operation & Wrapper Adjustments

Drawbar Height Adjustment

Dispenser Height and Table Stop Magnet Adjustment

Table Load Position Magnet Adjustment

Gearbox Roll Pin Replacement and Cut;Hold Adjustment

Cut & Hold Accumulator Pressure Adjustment

Machine Maintenance

Maintenance Intervals and Daily Checks

Weekly and Yearly Maintenance

Tightening Torque Values

Trouble Shooting

Table Operation Issues

Troubleshooting specific problems related to the wrapper table and its functions.

Plastic Film and Cut & Hold Issues

Troubleshooting problems with plastic film application and the cut & hold mechanism.

Control Box, Hydraulics, and Remote Control Issues

Troubleshooting problems with the control box, hydraulics, and remote controls.

Control Valve Issues

McHale Limited Warranty Details

McHale 995 LSR Specifications

General IconGeneral
BrandMcHale
Model995 LSR
CategoryStretch Wrapping Systems
LanguageEnglish

Related product manuals