McHale 995 LSR - Available Wrapping Programs

McHale 995 L+T Square Bale Wrapper
42
8.4 Available wrapping programs
The following list shows the list of wrapping programs that are available. The items that
are greyed out are not used/available on this machine.
Program Description Table start position
Standard 0
Not used on 995_L
series
Cut & hold at left side of
the machine
Combi trailed 00
Not used on 995_L
series
Combi standard IL
Not used on 995_L
series
Remote R97L
Not used on 995_L
series
Cut & hold at the left side
of the machine
Remote R94 995 LSR standard
Cut & hold at the front of
the machine
Remote RT
Not used on 995_L
series
Cut & hold at the front of
the machine
Remote R
Not used on 995_L
series
Side load SR94 995 LSR side load
Cut & hold at the left side
of the machine