McHale 995 LSR - Electronic Control System; Bale Wrap Computer Overview (995 L & 995 LS)

McHale 995 L+T Square Bale Wrapper
31
8
Electronic Control System
8.1 Bale Wrap Computer (995 L & 995 LS)
.
There are three buttons at the centre of the front panel:
 CAL or Program
 Select Channel
 Set or Reset
These are used individually or in combination to program, set/reset or select a function.
The Bale Wrap Computer is used to monitor and control a number of different McHale
bale wrapping machines both manual and semi-automatic. It is very important that the
correct program be selected to control the wrapping machine.
Model Type of control Program
995 L or 995 LS Manual Program 1
Current number
of wraps
Channel
Indicator
CAL/ Program
Not used
Not used
Set Target Wraps
Set Alarm Threshold
Reset Totals
Target number of
wraps
Select Channel