McHale 995 LSR - Electronic Control Box (995 LSR, TS & TSR)

McHale 995 L+T Square Bale Wrapper
40
8.2 Electronic Control Box (995 LSR, TS & TSR)
The Electronic Control box is the main interface between the operator and the machine.
While the machine is fully automatic mode, setting up is required before wrapping
commences. It is also possible to work the machine manually through the buttons on
the control box. The Electronic Control Box is fitted to the following machines:
 995 LSR
 995 TS
 995 TSR
Remote
Control
Receiver