McHale
991B
Round Bale Wrapper
62
The following should be inspected every time, before travelling on a public road:
Ensure that the tyres are set to the correct pressure as per safety decal and
according to the specifications, as outlined on “General dimensions &
specifications” on page 11.
Attention must be paid to the maximum travel speed-limit (40 km/hr) printed
on the chassis plate, on the left hand side of the machine. Other speed limits
that may be printed, on the drawbar plate or axle plate, for example are not
relevant.
Ensure that all the national road traffic regulations relating to the country are
fulfilled i.e. the use of safety chains may be mandatory in certain countries.
To Next Page
Loading...
