McIntosh C200 User Manual

10
C200C Rear Panel Connections
Connect the C200C
power cord to a live AC
outlet. Refer to informa-
tion on the back panel of
the C200C to determine
the correct voltage for
your unit
Main Fuse holder,
refer to information
on the back panel of
the C200C to deter-
mine the correct
fuse size and rating
The EXTernal SENSOR
jack permits the connection
of a McIntosh IR sensor for
remote operation
DATA PORTs send signals to
compatible source components
and allow remote control opera-
tion
PASSTHRU Power
Control input receives
a turn-on signal from
a McIntosh Home
Theater Controller
MAIN POWER CONTROL
Output sends a turn-on signal
to a McIntosh Power Amplifier
when the C200C is turned On
AMPLIFIER POWER CONTROL
Outputs send a turn-on signal to a
McIntosh Power Amplifier when
the C200C Front Panel OUTPUT 1
and/or 2 is On
TO C200 PREAMPLIFIER
Connector accepts a 25 con-
ductor cable that connects
all control signals and power
supply voltages from the
C200C to the C200P
ACCessory POWER CONTROL
Outputs send a turn-on signal to
McIntosh Source Component(s)
and/or Power Controller when the
C200C is On

McIntosh C200 Specifications

General

Brand	McIntosh
Model	C200
Category	Amplifier
Language	English