14
Remote Control Push-Buttons
Press to Power the
C220 ON or OFF
Selects one of the eight
available Audio Sources
Selects a Disc Player, Music Server
or Tape Recorder Function and also
performs various functions on a
variety of McIntosh Components
Use to select tuner presets, disc
tracks or any numbered operation
Mutes the audio
Adjusts the volume level up or down
Selects On Screen Functions on a
variety of McIntosh Components
Selects Output 1, AM Tuner Operat
-
ing Functions and Disc Selection on
certain McIntosh Disc Players
Selects Output 2, FM Tuner Operat
-
ing Functions and Track Selection
on certain McIntosh CD Players
Press to REVIEW Tuner Station
Presets and select certain functions
on a variety of McIntosh Compo-
nents
Press MODE to switch between
Stereo and Mono Modes
Press TRIM and then the LEVEL
Push-buttons to select and adjust
various functions
Turns AC Power ON or OFF to
certain McIntosh Components when
connected via the Data Port
Selects Functions for McIntosh
Home Controller and as a “shift”
key when used with the AM or FM
push-buttons to select Output (Spkr)
1 or 2
Notes: Push-buttons whose function is not identified above are for use with other McIntosh Products. The Remote Control
shipped with your C220 may differ from the illustration above; however, the functionality is the same.
Press to Power ON
the C220
Press to Power OFF
the C220
LED illuminates during the time a
remote command is sent to the C220
Switches OFF the
entire C220 System
Selects the FF (Fast Forward) or
REWind Mode on Disc Player,
Music Server or Tape Recorder;
tunes Up or Down the AM/FM
Dial
To Next Page
Loading...
Need help?
General
