PERFORMANCE LIMITS
Performance limits are the maximum deviation
from perfection permitted for a Mclntosh instrument.
We promise you that when you purchase a new C 35
from a Mclntosh franchised dealer, it will be capable
of or can be made capable of performance at or ex-
ceeding these limits or you can return the unit and
get your money back. Mclntosh is the only manufac-
turer that makes this statement.
FREQUENCY RESPONSE
+ 0, -0.5dB from 20 Hz to 20,000 Hz
RATED OUTPUT
2.5V
OUTPUT IMPEDANCE
Balanced 6000
Unbalanced 600
MAXIMUM VOLTAGE OUTPUT
Main and Tape Output- 8V from 20 to 20,000 Hz
TOTAL HARMONIC DISTORTION
0.002% maximum from 20 to 20,000 Hz at rated
output.
SENSITIVITY
Phono- 2.5mV for 2.5V rated output (0.5mV IHF)
High Level- 250mV for 2.5V rated output
(50mV IHF)
SIGNAL TO NOISE RATIO, A-WEIGHTED
Phono- 90dB below 10mV input (84dB IHF)
High Level- 105dB below rated output (95dB IHF}
MAXIMUM INPUT SIGNAL
Phono- 90mV
High Level- 10V
INPUT IMPEDANCE
Phono- 47K ohms and 65pF capacitance
High Level- 22k ohms
VOLTAGE GAIN
Phono to Tape- 40dB
Phono to Main- 60dB
High Level to Tape- 0dB
High Level to Main- 20dB
EQUALIZATION CONTROLS
Variable 12dB boost to 12dB cut at center frequen-
cies of 30, 150, 500, 1500, 10kHz
GENERAL INFORMATION
SEMICONDUCTOR COMPLEMENT
49 Bipolar Transistors
73 Field Effect Transistors
35 Integrated Circuits
112 Diodes
AC POWER OUTLETS
4 Black, switched, and 1 red, unswitched, 1500
watts total capacity
POWER REQUIREMENTS
120 Volts, 50/60Hz, 25 watts
MECHANICAL INFORMATION
SIZE:
Front panel measures 16 1/8 inches wide (41 cm)
by 5 7/16 inches high (13,8 cm) by 13 inches deep
(33 cm), including connectors. Knob clearance re-
quired is 1 3/8 inches (3.5 cm) in front of mount-
ing panel.
FINISH:
Front panel is glass with gold/teal nomenclature il-
lumination and anodized gold and black
aluminum. Chassis is black.
MOUNTING:
Exclusive Mclntosh developed professional
PANLOC.
WEIGHT:
18 pounds (8.2 kg) net, 30 pounds (13.6 kg) in ship-
ping carton.
PERFORMANCE LIMITS 11
To Next Page
Loading...
