STEREO PRE-
AMPLIFIERS
C42 Audio
Control
Center
Copy from:
www.McintoshLabs.com
BE052004
Quick Facts
Beneath the surface beauty of the McIntosh C42 stereo preamplifier lies a
formidable piece of audio machinery. Nine inputs, including a Dual Aux/Moving
Magnet Phono input, provide more than adequate connection possibilities. The
preamp's control functions include separate Listen and Record selectors with
independent Listen and Record processor loops. An 8-band Program Equalizer helps
tune the sound to the listening room. The maximum intermodular distortion and
THD allowed is .002%
About This Product
● Nine inputs including a Dual Aux/Moving Magnet Phono input
● Remote power control (1 main, 1 accessory, 2 switched)
● 3 Balanced Outputs: Main, Line 1, Line 2
● Separate Listen and Record selectors
● Independent Listen and Record processor loops
● 8-band Program Equalizer
● Programmable Source Input Level Trim
Type of Volume Control
Precision, optically regulated volume control with digital readout in decibels
or percent
Programmable Source Trim
Independent Listen and
Record Selection
Electromagnetic Switching
Low-Noise 1% Metal Film
Resistors
Exclusive McIntosh 8-Band
Graphic Equalizer
Glass Front Panel with
Illuminated Nomenclature
Connector for External IR
Sensor
Control Data Outputs
Ultra-Low Distortion
Extra-Wide Dynamic Range
Polyester Coupling
Capacitors
Ultra-precision (.5%) metal
film resistors and 1%
polypropylene capacitors for
phono equalization
Dual Processor Loops
Balanced Input(s)
Phono Input Moving Magnet Phono Input
Balanced Output(s)
Type of Amplifier Solid State
Headphone Jack
Gold Plated Terminals
Frequency Response 20 Hz to 20 KHz +0 / -0.5 dB
To Next Page
Need help?
General
