McIntosh C500 Connection Diagrams

C500 Controller / C500P or C500T Preamplifier Input and Control Connection Diagram
3A
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. 04106800
McIntosh
Sensor
McIntosh Audio/Video Player
McIntosh AM/FM Tuner
McIntosh D/A Converter
Turntable
Server
Processor
Left
Right
Right Left
Note: Refer to the C500 Owner’s Manual page 12 for additional connection information.
Connection Legend:
Data Cable*- Digital Signal Cable -
Sensor/Keypad Cable - RS232 Cable -
Power Control Cable* - Ground Wire -
Audio Signal Cable - AC Power Cords -
Video Signal Cable - Loudspeaker Cable -
RF Signal Cable -
*
2 conductor shielded with 1/8 inch stereo mini phone plug on each end.
or

McIntosh C500 Specifications

General

Number of Channels	2
Total Harmonic Distortion	0.005%
Balanced Inputs	2
Type	Preamplifier
Frequency Response	20Hz - 20kHz (+0, -0.5dB)
Phono Inputs	1
Digital Inputs	1
Digital Input Type	USB
Maximum Output Voltage	16V (Balanced), 8V (Unbalanced)
Inputs	Phono, Digital
Signal-to-Noise Ratio	100dB (High Level)
Gain	40dB (MM Phono), 60dB (MC Phono)
High Level Inputs	6