McIntosh D100 User Manual

8
Rear Panel Connections
Connect the D100 power
cord to a live AC outlet.
Refer to information on the
back panel of your D100 to
determine the correct volt-
age for your unit
DIGITAL AUDIO INPUTS COAXIAL
Inputs 2 and 1 for components with a
Digital Audio Coaxial Output
DIGITAL AUDIO INPUTS OPTICAL
INPUTS 2 and 1 for components with
a Digital Audio Optical Output
USB DIGITAL AUDIO INPUT
with control signal for connection
to a computer
IR INput for
signals from a
compatible IR
Room Sensor
POWER CONTROL IN receives
turn-on signals from a McIntosh
component.
POWER CONTROL OUT sends
turn-on signals on to another McIn-
tosh Component.
DATA IN receives
control data from a
McIntosh Preamplifier
or A/V Control Center
FIXED AUDIO OUTPUTS UNBALANCED
analog audio output signals to a Preamplifier
or A/V Control Center
FIXED AUDIO OUTPUTS BALANCED
analog audio output signals to a Preamplifier
or A/V Control Center
VARIABLE AUDIO OUTPUTS UNBALANCED
analog audio output signals to a Power Amplifier
VARIABLE AUDIO OUTPUTS BALANCED
analog audio output signals to a Power Amplifier

McIntosh D100 Specifications

General

Brand	McIntosh
Model	D100
Category	Amplifier
Language	English