Need help?Do you have a question about the McIntosh MC-2105 and is the answer not in the manual?
General| Power Output | 105 watts per channel |
|---|---|
| Total Harmonic Distortion (THD) | 0.25% |
| Signal to Noise Ratio | 90dB |
| Dimensions (W x H x D) | 16 x 7-1/8 x 14-1/2 inches |
| Weight | 75 lbs |
| Damping Factor | 20 |
| Output Impedance | 4, 8, and 16 ohms |
| Input Sensitivity | 1.5V |
| Frequency Response | 20Hz to 20kHz (+0 -0.5dB) |
Specifies continuous power output in RMS watts per channel into different impedances.
Details harmonic distortion levels at rated power and frequency range.
Defines intermodulation distortion limits for peak power output and frequency combinations.
Lists acceptable frequency response ranges and their dB deviations at rated power.
States the minimum signal-to-noise ratio below rated output.
To Next Page
